Installing Pharos Popup Client 5.0 for Windows
2000
The Pharos Popup installation must be completed in two steps.
Part one: Installing a local Printer.
If your classes are located at the Rome Campus where there is more than one
student printer available,or if you go to more than one campus for classes you
will need to install a separate local printer for each student printer you plan
to use.
1. Click on your start button, choose settings and click on
printers.
2. Double click on the add printer icon.
3. Click
next.
4. At the Local or network printer window make sure the local
printer option is selected. Then be sure to un-check the box to automatically
detect and install my plug and play printer. Click next.
5. In the select
printer port window click on LPT 2 one time to highlight it, then click
next.
6. In the next window on the left of the screen you will see a list
of printer manufacturers. Scroll down until you see Canon and click one time to
select it.
7. On the right of your screen under printers scroll down
until you see Canon IR 330-400 PS Ver 1.01 and click on this one time to
highlight it then click next.
8. In the name your printer window you
should name your printer descriptively such as Rome Library if you plan to use
the student printer at the Rome campus located in the library or Heritage if you
plan to use the printer at Heritage Hall. Then click next.
9. At the
printer sharing window accept the default of Do not share and click
next.
10. Choose no that you do not want to print a test page and click
next.
11. Click finish.
12. You will see files copying and then
you will see the printer you have installed inside your printers
window.
13. Repeat steps 1 – 11 if you plan to use more than one Floyd
college student printer.
14. Once you are finished adding local printers
close the printer’s window.
Part Two: Download and Installation of the Pharos Popup Client for
Georgia Highlands College Student Printing
1. Download the Pharos
Software
2. Choose save to disk and save to your desktop or
somewhere that you will be able to easily locate it.
3. Double click on
the Pharos5.exe icon.
4. The files will automatically unzip to your temp
directory and the installation of Pharos will start. This will take a minute or
so.
5. At the welcome to Pharos screen click next.
6. At the
Installation attendance screen accept the default of Attended and click
next.
7. At the type of installation screen accept the default of typical
and click next.
8. At the installation directory window click
next.
9. Accept the default of saving backup copies of replaced files and
click next.
10. In the TPC/IP host name screen click on the box for
TCP/IP address and type in 168.30.219.122 and click next.
11. You will
see a screen asking you to select Pharos Popup Printers. You should check the
box of each local printer you have added for use with the Pharos Printing
system. Do not check the box for any local printers you already have at your
home or office. Only check the boxes for printers you have added for use
with Pharos according to the directions in the previous section.
12.
After selecting printers click next.
13. You will then see a window
prompting you to select a printer queue for use with your printers. Pay close
attention to the name of the printer listed in the top middle of your screen.
This will be very important if you have installed more than one printer for
use with the Floyd college Pharos printing system. After taking note of your
printer name you should click on browse.
14. You will see a new window
for selection of Print queues. In this new window, on the left side of the
screen you will see Servers. Click on the server named Socrates one time to
highlight it. You should then see shared print queues listed on the right side
of your screen. Choose the print queue local to the campus on which you attend
classes. Please see chart below for printer locations. Again pay close attention
that you are matching the correct print queue for your campus location. As the
installation continues you will be prompted to add a print queue for each local
printer you have installed and checked for use with the Pharos printing
system.
| Printer Location |
Printer Name |
| Rome Campus Library |
Plato_R_LIB-IR |
| Rome Campus Student Center |
Homer_R_SC-IR |
| Rome Heritage Hall Campus |
Virgil_HH-IR |
| North Metro Campus |
Orpheus_NM-IR |
| Cartersville Campus |
Euripides_C-IR |
| Waco/Bremen Campus |
Sophocles_W-IR |
15. Once you have choosen
your local print queue by clicking one time to highlight it you should click OK
and then click next.
16. If you have installed more than one local
printer for use at more than one Georgia Highlands College Campus you should continue steps
13 through 15 until all printers are choosen then click next.
17. At the
start installation window click Start.
18. It will take a minute or so
for files to copy and the system to configure.
19. Click
Finish
20. Then click Ok to restart your system.